The XM-18 Automatic Computer Control Incubator is a device that helps incubate eggs by controlling the temperature and humidity levels. The incubator can also be set to turn the eggs automatically, as well as adjust the ventilation cycle and time.
This guide explains how to adjust these settings on the XM-18 incubator. With its adjustable settings, the XM-18 can be tailored to specific needs, making it a versatile tool for incubating eggs.
Note: This Blog Content Contains Affiliate Links
Table of Content
Features
- Device Size : 16 cm x 9 cm x 8 cm
- Voltage: AC 160V – 240V
- Temperature Measuring Range : 0 – 99 Degrees Celcius
- Temperature Measurement Accuracy: ± 0.1℃
- Humidity Measurement Range: 0-99% RH
- Humidity Accuracy: ± 3% RH
- The Number of Egg-Turning: the maximum record is 999 times.
- The Cycle of Egg-Turning: adjustment of 0 – 999 minutes(the factory default is 90 minutes)
- Egg-turning Time: adjustment from 0 to 999 seconds(the factory default is 180 seconds)
- Ventilation Cycle: from 0 to 999 minutes
- (The factory default is 120 minutes)
- Ventilation Time: from 0 to 999 seconds(the factory default is 30 seconds)
- Temperature Measurement Line Length: about 1.5 meters
- Number of Signal-output: 7 (over-temperature, temperature control, insufficient temperature, egg left-turning, egg right-turning, humidity control, alarm)
- Number of Display Screens: 4
To Purchase this device, Check out our affiliate link
XM-18 Multifunction Controller Incubator Automatic Incubator Industrial Incubators Humidity Temperature Probe – Shopee MY – https://invle.co/clev0kh
XM-18 Full Settings
For the XM-18 to function correctly as required, adjusting the device is crucial to building a fully automatic incubating machine.
XM-18 Humidity & Temperature Settings
| Button | Program | Label | Ideal Setting (Quail) | Ideal Setting (Duck) | Ideal Setting (Chicken) |
|---|---|---|---|---|---|
| (SET & UP) | P1 | Max Temp. for Alarm to Switch On | |||
| P2 | Fan activated on set temperature | ||||
| P3 | Max Temp. Heater 1 will switch Off | ||||
| P4 | Min Temp. Heater 1 will switch On | ||||
| P5 | Min Temp. Heater 2 will switch ON | ||||
| P6 | Alarm On when Temp. Falls | ||||
| P7 | Humidity on when Reches max % | ||||
| P8 | Max Humidity % for Humidifier to Stop | ||||
| P9 | Min Humidity % for Humidifier to Start | ||||
| PP | Min Humidity % for alarm to Buzz |
XM-18 Egg Roller Actuator Settings
| Button | Program | Label | Settings (Minute) | Remark |
|---|---|---|---|---|
| (SET & DOWN) | F1 | Each Cycle Interval for the Motor to Start/Turn Right | 180 minutes (3 Hours/cycle) | – |
| F2 | Each Cycle Interval for the Motor to Start/Turn Left | 180 minutes (3 Hours/cycle) | – | |
| F3 | Ventilation Fan to Activate Each Interval | 15 cycles/interval x 60/min = 900 minutes | – | |
| F4 | Duration of Ventilation Fan Remains On | 2min/cycle x 60/min = 120min | ||
| F5 | Calibration of 2nd Temperature Sensor Install – Difference Interval | 0.5 | Difference between Temp. Sensor 1 & Temp. Sensor 2 Difference. | |
| F6 | Calibration of 2nd Humidity Sensor Install – Difference Interval | 0.5 | Difference between Humidity Sensor 1 & Humidity Sensor 2 Difference. | |
| F7 | Counter for Each Time Motor Rotates |
XM-18 Other Settings
| Button | Label | Remark |
|---|---|---|
| (SET) | Adjust Max Set Temperature | – |
| (SET + OK) | Adjust Max Humidity % | – |
| (UP & DOWN) | Reset All Previous Settings To Default | – |
| (UP & Hold) | Move Motor Manually | – |
| (DOWN) | Stop Alarm Sound | – |
Conclusion.
This modal XM-18 Automatic Computer Controller is suitable for any incubator built up to 2200 quail eggs weight.